Curelastometer

เครื่องหาอุณหภูมิและเวลาคงรูปของยาง

เครื่องมือสำหรับทดสอบคุณสมบัติการเชื่อมขวางของยาง หรือเรซิ่น เพื่อหาเวลาที่โมเลกุลของยาง (หรือเรซิ่น) เริ่มเกิดการเชื่อมขวาง (Scorch Time)
และเวลาที่โมเลกุลของยาง (หรือเรซิ่น) เกิดการเชื่อมขวาง (Cure Time)

Frictionless sealed-type rotorless curemeter / curing characteristics testing machine

CURELASTOMETER® 7 (seven)

Features :

For Rubber or Resin Research/Development.

Measuring the vulcanization process for both curing characteristics in Rubber and hardening behavior of Resin.

Critical informations of curing speed, Optimum curing time, scorch time, etc.

  • A tester that complies the ISO6502 and JIS K6300-2.
  • Its test section is a non frictional closed structure that completely eliminates frictional errors.
  • The tester itself has a high torsion rigidity.
  • Its fixed die also performs as temperature protection, resulting in excellent uniformed temperature.
  • It is a rotor-less type cure meter.
Main Specifications
Model : 7R, 7P
Drive Motor : Synchronous motor with reduction gear
Transfer Connection : Elasticity connection by blade springs
Frequency of Oscillation : 100 cpm
Oscillation Angle : ±1 (Option ±0.5 ํ)
Torque Detect Method : Load cell method by strain gauge
Max Torque : 20 N*m
Temp Controller : Digital indicator, PID control
Temp Control Range : RT +10 ํC~230 ํC
Temperature Display Accuracy : ±0.3 ํC, (Setting ability 0.1 ํC)
Measurement Time : 1.0 ~999.9 min
Power Supply : AC 100V ±10%, 50 or 60 Hz 1500 VA
Pressure Method : Air Cylinder
Air Supply : 0.39~0.69 Mpa (4~7kgf/cm²)
Total Size : 410 (W) x 530(D) x 1100(H) mm
Total Weight : Approx 150 kg
Environmental Conditions : +5~+35 ํC, 35~80%RH (With no condensation)
Data Processing Software
Calculated Data : ML MH tc(10), tc(50), tc(90), tc(∆80), tsx M”(ML), M”(MH), M'(ML), M'(MH), tan(ML), tan(MH)
Data Processing Content : | M*|, M’, M”, dM, tanδ, TEMP

Frictionless sealed-type rotorless curemeter / curing characteristics testing machine

CURELASTOMETER® IID

Features :

For the measurement of the curing/ hardening behavior of rubbers and thermo setting resins.

  • This instrument makes you easy to obtain the minimum/ maximum torque, scorch time, and optimum cure/hardening time of rubbers and resin compounds through simple operation.
  • The newest date processing system is included on PC as standard equipment.
Main Specifications
Oscillation Angle : IIDR : ±3 ํ, IIDP : ±1 ํ
Oscillation Frequency : 6cmp
Temperature : RT+10~+200 ํC
Resolution Power : 1 ํC
Communication Specification : RS 232C (9Pin)
Dimensions : 545(W) x 545(D) x 1.125(H) mm
Weight : 200kg
Power Supply : AC100v±10% 50/60Hz,1000VA
Air Supply : Normal : 0.39Mpa (4kgf•cm) Max : 0.69Mpa (7kgf•cm)
Data Processing Software
Calculated Data : ML MH tc(10), tc(50), tc(90), tc(∆80)
Data Processing Content : (Judgement of pass/Fail with OK/NG) (Functions of statistical processing, Control chart, and Histogram creation)

Moving Die Rheometer

MDR-Jplus+

Features :

MDR-Jplus+ employs sealed biconical dies meeting all relevant ISO, ASTM, DIN, and JIS standards. MDR-Jplus+ is a reliable, accurate, and easy-to-operate rotor-less curemeter perfect for routine and standards-driven testing of rubber curing.

Main Specifications
International : ISO 6502, ASTM D 5289,DIN 53529
Standards : JIS K 6300
Electrical : Single Phase 110/220 V, 50/60 Hz
Pneumatics : Filtered Air 0.4 Mpa
Die Configuration : Biconical, Closed Die System, Sealed
Sample Volume : 3 to 5 cm3
Torque Range : 200 dNm
Oscillation Frequency : 100 cpm
Oscillation Amplitude : 0.5, 1.0 degrees. (1.0 Optional)
Temperature Range : Ambient temp + 10 to 230°C
Temperature Control : Digital P.I.D.
Measurement Data : Torque, Temperature
Data Calculation : Minimum, Maximum, Scorch Points, Percent Cure Points
Dimensions : 56(w) x 58(D) x 110(H) cm
Weight : 150 kg
Resolution Temperature : 0.1 °C
Data Processing Software
Calculated data : ML MH / Ts1 Ts2 tc(10), tc(50), tc(90)